Role Of Each Part; Starboard - Hitachi StarBoard FX-DUO-63 User Manual

StarBoard FX-DUO Series

1.3 Role of Each Part

1.3.1 StarBoard

(1)
(2)
(6)
(1) Digitiser Storage Area
Receives information regarding characters
or images drawn with the pen or the user's
finger, and transmits this data to the PC.
(2) Function Area (Left and Right)
Shortcut buttons for functions that are
frequently used in applications are located
here. (Refer to the next page for details.)
(3) Input Area
Characters or images drawn in this area are
imported into the PC.
When using the StarBoard in Projection
Mode, make sure that the image projected
from the projector is kept within this area.
(4) USB Cable
Used to connect the StarBoard with the PC.
(5)
(5) Casters
These are the casters for moving the board.
After setting up the StarBoard, be sure to
lock the casters. Lift up the tab to unlock a
caster and press down the tab to lock it.
Locked
(6) Pen Holder
Keep the pen in the pen holder when you are
not using it.
(7) Reflective tape (Inner Side of the Frame)
Reflects light. Used to capture pen or finger
operations.
1-5
Introduction
(3)
(7)
(4)
Unlocked
English