Replacing The Processor Heat-Sink Fan; Procedure; Postrequisites - Dell dxcwrk1 - XPS - One Owner's Manual

33

Replacing the Processor Heat-Sink Fan

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Align the screw holes on the processor heat-sink fan with the screw holes on the
computer base and replace the screws that secure the processor heat-sink fan to
the computer base.
2 Connect the processor heat-sink fan cable to the system board.

Postrequisites

1 Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
2 Replace the back cover. See "Replacing the Back Cover" on page 21.
Replacing the Processor Heat-Sink Fan
77
|