Removing The Inner Frame; Prerequisites; Procedure - Dell dxcwrk1 - XPS - One Owner's Manual

42

Removing the Inner Frame

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Prerequisites

1 Remove the back cover. See "Removing the Back Cover" on page 19.
2 Remove the stand. See "Removing the Stand" on page 47.
3 Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
4
Remove the trim cover. See "Removing the Trim Cover" on page 87.
5 Remove the I/O panel. See "Removing the I/O Panel" on page 91.

Procedure

1 Remove the screws that secure the inner frame to the computer base.
2 Gently pry the inner frame from the sides and lift the inner frame off the
computer base.
1 screws (18) 2 inner frame
Removing the Inner Frame
1
2
95
|