Postrequisites - Dell dxcwrk1 - XPS - One Owner's Manual

Owner's manual (pdf)
Table of Contents

Advertisement

15
Route the display-power, LVDS, and touchscreen cables through their routing
guides and replace the plastic shield.
16
Route the camera and infrared-module cables through their routing guides and
connect the cables to the system board.
17
Route the wireless-antenna cables through their routing guides and connect the
antenna cables to the wireless mini-card.
18
Route the speaker cables through their routing guides and connect the speaker
cable to the system board.
19
Route the power-button cable through its routing guides and connect the
power-button cable to the system board.
20
Connect the display-backlight cable to the display assembly.
21
Replace the screw that secures the grounding cable to the processor cooling-vents.
22
Replace the screw that secures the grounding cable from the right-speaker mesh
to the middle cover.

Postrequisites

1
Replace the inner frame. See "Replacing the Inner Frame" on page 97.
2
Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan"
on page 77.
3
Replace the trim cover. See "Replacing the Trim Cover" on page 89.
4
Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
5
Replace the stand. See "Replacing the Stand" on page 49.
6
Replace the back cover. See "Replacing the Back Cover" on page 21.
140
|
Replacing the Display Panel

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xps one 2710

Table of Contents