Replacing The Memory Module(S); Procedure; Postrequisites - Dell dxcwrk1 - XPS - One Owner's Manual

Owner's manual (pdf)
Table of Contents

Advertisement

15

Replacing the Memory Module(s)

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1
Align the notch on the memory module with the tab on the memory-module
connector.
2
Slide the memory module firmly into the connector at a 45-degree angle
and press the memory module down until it clicks into place.
If you do not hear the click, remove the memory module and reinstall it.
1
1
tab
3
memory module
3
Slide the memory-module shield on the system-board shield and replace the
screw that secures the memory-module shield to the system-board shield.

Postrequisites

1
Replace the back cover. See "Replacing the Back Cover" on page 21.
2
3
2
memory-module connector
Replacing the Memory Module(s)
41
|

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xps one 2710

Table of Contents