Replacing The Stand; Procedure; Postrequisites - Dell dxcwrk1 - XPS - One Owner's Manual

19

Replacing the Stand

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Insert the tab at the top of the stand into the slot on the computer base.
2
Align the screw holes on the stand with the screw holes on the hard-drive cage.
3 Replace the screws that secure the stand to the hard-drive cage.

Postrequisites

1 Replace the back cover. See "Replacing the Back Cover" on page 21.
Replacing the Stand
49
|