sliding plate lever
sliding plate
drive panel
2 Align the drive panel tabs with the side-door hinges.
3 Rotate the drive panel toward the computer until the sliding plate lever clicks into place and
the drive panel snaps into place on the front panel.
Drives
Your computer supports:
•
Two hard drives (Serial ATA)
•
Two FlexBay drives (can contain an optional floppy drive or optional Media Card Reader)
•
Two CD or DVD drives
General Installation Guidelines
Connect hard drives to the connector labeled "SATA" and connect CD/DVD drives to the
connector labeled "IDE".
Removing and Installing Parts
85