Clearing Forgotten Passwords - Dell Dimension 9100 Owner's Manual

NOTE:
check the device documentation.
Changing Boot Sequence for Future Boots
1 Enter system setup (see page 108).
2 Use the arrow keys to highlight the Boot Sequence menu option and press <Enter> to access
the menu.
NOTE:
3 Press the up- and down-arrow keys to move through the list of devices.
4 Press the spacebar to enable or disable a device (enabled devices have a checkmark).
5 Press plus (+) or minus (–) to move a selected device up or down the list.

Clearing Forgotten Passwords

CAUTION:
Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 55.
114
Appendix
To boot to a USB device, the device must be bootable. To make sure your device is bootable,
Write down your current boot sequence in case you want to restore it.
Before you begin any of the procedures in this section, follow the safety instructions in the
3 2 1
PSWD
3 2 1
RTCRST