Adjust The Flash Output; Optical Image Stabilizer - Panasonic Lumix DMC-GH2H Operating Instructions Manual

Applicable modes:
Adjust the flash output if the recorded pictures are too bright or too dark.
1
Select [FLASH ADJUST.] in the [REC] Mode menu. (P55)
2
Press 2/1 to set the flash output and then press
[MENU/SET].
•
You can adjust from [
•
Select [0 EV] to return to the original flash output.
Note
i j
•
[ ] or [ ] is displayed on the flash icon in the screen when the flash
level is adjusted.
[REC] Mode:

Optical Image Stabilizer

Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
The lens supplied in DMC-GH2H/DMC-GH2K has a stabilizer function.
• There is an [O.I.S.] switch on the 14 – 140 mm/F4.0 – 5.8 lens supplied in DMC-GH2H.
•
There is no [O.I.S.] switch on the 14 – 42 mm/F3.5 – 5.6 lens supplied in DMC-GH2K. Set the
[STABILIZER] settings in the [REC] Mode menu.
When using a lens with an [O.I.S.] switch, it is
possible to set to enable the Optical Image Stabilizer
by switching the [O.I.S.] switch on the lens to [ON].
(It is set to [MODE1] at the time of purchase.)

Adjust the flash output

j i
2 EV] to [ 2 EV] in steps of [1/3 EV].
Example when a lens with the
[O.I.S.] switch is mounted.
Recording
73
VQT3A36