Panasonic Lumix DMC-GH2H Operating Instructions Manual page 79

∫ Changing the settings for [
Bracket
1
Select [AUTO BRACKET] in the [REC] Mode menu. (P55)
2
Press 3/4 to select [
[SEQUENCE] and then press 1.
3
Press 3/4 to select the setting and then press [MENU/SET].
Item
[ / SETTINGS]
[STEP]
•
You can take one picture at a time when set to [
•
You can continuously take pictures up to set numbers when set to [
4
Press [MENU/SET] twice to close the menu.
Note
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
•
The exposure may be compensated incorrectly, depending on the brightness of the subject.
•
In this mode the Auto Review mode is activated, regardless of the user settings.
•
When the flash is activated, you can take only 1 picture.
•
Auto Bracket is disabled when Multi Film Bracket, White Balance Bracket, or Aspect Bracket is
set.
•
The Auto Bracket will be disabled during recording of the motion pictures.
/ SETTINGS], [STEP] and [SEQUENCE] in Auto
/ SETTINGS], [STEP] or
Settings
[ ] (single)
[ ] (burst)
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
Item
[SEQUENCE]
].
].
Recording
Settings
[0/`/_]
[`/0/_]
79
VQT3A36