Setting The Method Used To Focus (Af Mode) - Panasonic Lumix DMC-GH2H Operating Instructions Manual

[REC] Mode:
Setting the Method used to Focus
This allows the focusing method that suits the positions and number of the subjects to be
selected.
Also, it is possible to set the focus and exposure to the subject specified on the touch panel.
Select the mode that matches the recording conditions and the composition.
Set the focus mode lever to [AFS] or [AFC].
Switching the auto focus mode dial.
Note
•
The [š] is disabled in the following cases.
–
In [FOOD] in [CLOSE-UP]
–
In [NIGHT SCENERY] in Scene Mode
•
The AF Mode is fixed to [Ø] when using the Digital Zoom.
•
AF area will be fixed to a small point in [PERIPHERAL DEFOCUS] in Scene Mode.
• It will be set to [Ø] when a recording is performed with the Touch Shutter function (P38).
The camera automatically detects the person's face. The focus and
exposure can then be adjusted to fit that face no matter what portion
of the picture it is in. (max. 15 areas)
When the camera detects a person's face, the AF area is displayed.
Yellow:
When the shutter button is pressed halfway, the frame turns green
when the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
Note
•
Position and size of the AF area can be changed. (P83)
š
•
When [ ] is selected and [METERING MODE] is set to multiple [C], the camera will adjust
the exposure to suit the person's face. (P121)
•
Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. The AF Mode is switched to [
–
When the face is not facing the camera
–
When the face is at an angle
–
When the face is extremely bright or dark
–
When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
–
When there is rapid movement
–
When the subject is other than a human being
–
When the camera is shaking
•
The camera may detect the subjects other than a person as the face. In this case, switch the
AF Mode to any modes other than [š] and then take a picture.
About [š] (Face Detection)
(AF Mode)
VQT3A36
Recording
].
81