Recording; Optical Image Stabilizer - Panasonic Lumix DMC-G3 Owner's Manual

Recording Mode:

Recording

Optical Image Stabilizer

Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
The interchangeable lens (H-FS014042, H-FS045200) has a stabilizer function.
•
There is an [O.I.S.] switch on the interchangeable lens (H-FS045200).
•
There is no [O.I.S.] switch on the interchangeable lens (H-FS014042). Set the [STABILIZER]
settings in the [REC] Mode menu.
When using a lens with an [O.I.S.] switch, it is
possible to set to enable the Optical Image Stabilizer
by switching the [O.I.S.] switch on the lens to [ON].
(It is set to [ ] at the time of purchase.)
∫ Setting the Stabilizer in the [REC] Mode menu
1
Select [STABILIZER] in the [REC] Mode menu.
2
Press 3/4 to select the setting and then press [MENU/SET].
Item
[STABILIZER] does not work.
(This can be selected only when using a lens without the [O.I.S.]
[OFF]
switch.)
[ ] Jitter is always compensated during Recording Mode.
(Normal)
Camera shake is corrected for up/down movements. This mode is ideal
¢
for panning (a method of taking pictures which involves turning the
[ ]
(Panning)
camera to track the movements of a subject which continues to move
in a fixed direction).
¢ This item cannot be set in the Intelligent Auto Mode.
•
The [STABILIZER] feature is only available if the lens you are using has an internal
stabilizer.
•
Exit the menu after it is set.
Recording
Example when a lens with the
[O.I.S.] switch is mounted.
(P56)
Settings
- 69 -