Panasonic Lumix DMC-G3 Owner's Manual page 80

∫ Changing the settings for [
Bracket
1
Select [AUTO BRACKET] in the [REC] Mode menu.
2
Press 3/4 to select [
[SEQUENCE] and then press [MENU/SET].
3
Press 3/4 to select the setting and then press [MENU/SET].
Item
[ / SETTINGS]
[STEP]
•
You can take one picture at a time when set to [
•
You can continuously take pictures up to set numbers when set to [
•
Exit the menu after it is set.
Note
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
•
The exposure may be compensated incorrectly, depending on the brightness of the subject.
•
When taking pictures continuously using Auto Bracket with [I.RESOLUTION] set to
[EXTENDED], it may take time to record all the set number of pictures.
•
Auto Bracket setting is fixed to [
•
When the flash is activated, you can take only 1 picture.
•
Auto Bracket is disabled when White Balance Bracket is set.
•
The Auto Bracket will be disabled during recording of the motion pictures.
Recording
/ SETTINGS], [STEP] and [SEQUENCE] in Auto
/ SETTINGS], [STEP] or
Settings
[ ] (single)
[ ] (burst)
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
], [3•2/3] and [0/`/_] in the Intelligent Auto Mode.
- 80 -
(P56)
Item
[SEQUENCE]
].
].
Settings
[0/`/_]
[`/0/_]