Panasonic Lumix DMC-G3 Owner's Manual page 202

The LCD monitor/Viewfinder is too bright or dark.
> Adjust the brightness of the LCD monitor/viewfinder to a proper level.
•
Check [LCD MODE] setting.
It may flicker for an instant or the brightness of the screen may change significantly
for an instant.
•
This occurs due to the aperture of the lens changing when the shutter button is pressed
half-way, or when the brightness of the subject changes. This is not a malfunction.
The picture is not displayed on the LCD monitor.
• Does the picture appear on the viewfinder?
> Press [LVF/LCD] to switch to LCD monitor display.
LCD monitor and viewfinder do not switch when [LVF/LCD] is pressed.
•
It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor.
You see red, green, or blue flashes when you move your eyes in the viewfinder,
or when the camera is moved rapidly.
•
This is a characteristic of the drive system of the viewfinder of this unit, and it is not a
malfunction. There will be no problem with the recorded image.
Others
LCD monitor/Viewfinder
(P64)
- 202 -
(P64)
(P11)