Saw Blade Dismounting And Mounting - Hitachi CD14F - 14" Portable Dry Cutting Saw Instruction Manual

English
8. How to use the dust box (Fig. 17)
Base
Dust Box
9. How to use the stopper (Fig. 18)
Hex Head Socket Screw

SAW BLADE DISMOUNTING AND MOUNTING

WARNING:
To prevent an accident or personal injury, always turn off the trigger switch and discon-
nect the power plug from the receptacle before dismounting or mounting the saw blade.
CAUTION:
Use only 17mm wrench provided to install or remove the blade. Failure to do so may
result in overtightening or insufficient tightening of the bolt. This could cause serious
injury to operator or others in the general vicinity of the tool.
1. Dismounting the saw blade (Fig. 19-a and Fig. 19-b)
(1) Loosen the machine screw and move the sub cover unitl it touches the bolt.
(2) Press spindle lock, and loosen bolt with 17 mm wrench. If the spindle lock can not be easily pressed
into fix the saw blade spindle, turn the bolt by wrench while applying pressure on the spindle lock.
The saw blade spindle is fixed when the spindle lock is pressed in ward.
(3) Removing the bolt, wheel washer and the saw blade.
WARNING:
16
WARNING:
(1) Remove the wing bolt and pull the dust box out of the machine.
Wing
Bolt
(2) Empty the dust box and cleaning the machine.
(3) The dust box return into the machine and tighten the wing bolt
securely.
CAUTION:
Fig. 17
The stopper facilitates continuous same length cutting.
(1) Loosen the hex head socket screw and pull the holder
(2) Loosen the wing bolt and set the stopper
Stopper
(3) Tighten the wing bolt and hex head socket screw
Wing Bolt
Holder
Fig. 18
Be very carefull when removing the saw blade after it has been used for cutting
several materials in succession, since the saw blade maybe very hot.
To prevent an accident or personal injury, always
turn off the trigger switch and disconnect the
power plug from the receptacle before cleaning
Be sure to install removed wing bolt.
To prevent an accident and personal injury.
Do not touch any part of the dust box except
its handle immediately after operation; it may
be extremely hot and could burn your skin.