wrenches are removed from the tool before turning GENERAL OPERATIONAL PRECAUTIONS it on. 17. Avoid unintentional starting. Do not carry a WARNING! When using electric tools, basic safety plugged-in tool with a finger on the switch. Ensure precautions should always be followed to reduce the risk switch is off when plugging in.
15. Do not use cutting oil when cutting materials with the tipped saw immediately and contact an the metal cutter. Authorized Hitachi Service Center for inspection SPECIFICATIONS Voltage 110V Power input...
4. Carbide tipped saw blade: Extension cord Stainless steel, soft steel When the work area is removed from the power material cutting use. source, use an extension cord of sufficient thickness Uses: For cutting stainless steel/ and rated capacity. The extension cord should be soft steel materials kept as short as practicable.
If for any reason the brake fails to ~~~~~~~~~~~~~~~~~~~~~~~~ If for any reason, the protective cover will not operate, please contact an Authorized Hitachi ~~~~~~~~~~~~~~~~~~~~~~~~ move into position to cover the blade, discontinue Service Center for repair.
To keep the cut clean, push the saw forward at the HOW TO USE same speed. 3. The slit in the base indicats the position of the edge CAUTION: of the blade at further end of the cut. This is useful If the tipped saw blade stops suddenly, makes an when cutting the work piece to a mid-way point.
5. Replacing carbon brushes Disassemble the brush caps with a slotted-head screwdriver. The carbon brushes can then be easily removed. NOTE Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.