Lenovo ThinkServer RD230 Hardware Maintenance Manual page 38

The following illustration helps you identify the connectors, controls, and LEDs on the front control panel of
your server.
Figure 3. Front control panel locations
1
USB connector
2
USB connector
3
ID button
4
NMI button
5
Reset button
6
Ethernet 1 status LED
The following table describes the meaning of the LEDs on the front control panel.
Table 4. Front control panel LEDs
LED State
Power LED On
Blinking
Off
Hard disk drive
Off
LED
Blinking
Ethernet 1
On
status LED
Blinking
Off
Ethernet 2 On
status LED
Blinking
Off
System status On
LED
Off
ID LED On
Off
Each hard disk drive has two status LEDs on the front. The Green LED 1 (bottom) indicates activity and
the Amber LED 2 (top) indicates the RAID status.
Notes:
26
ThinkServer RD230 Hardware Maintenance Manual
7
Ethernet 2 status LED
8
Hard disk drive status LED
9
Power button and LED
10
System ID LED
11
System status LED
12
LED (will not be used in this server)
Color
Green The server power is on.
Green The server power is under S1.
Off The server power is off.
The hard disk drive is not active.
Off
Green The hard disk drive is active.
LAN is linked.
Green
Green LAN is active.
LAN is not linked.
Off
Green LAN is linked.
Green LAN is active.
Off LAN is not linked.
Red Failure. Over temperature or over voltage.
Off No failure.
Blue System is identified.
Off System is not identified.
Description