Lenovo ThinkServer RD230 Hardware Maintenance Manual page 124

Table 30. Submenus under the CPU Configuration (continued)
Item
Intel® Virtualization Tech
Execute-Disable Bit Capability
Intel® HT Technology
Active Processor Cores
Intel® SpeedStep™ tech
Intel® TurboMode tech
Intel® C-STATE tech
C3 State
C6 State
C State package limit setting
C1 Auto Demotion
C3 Auto Demotion
ACPI T State
Notes:
1. The settings in [ ] are the default settings in the Setup Utility program.
2. The above options might vary depending on the type of the installed microprocessor.
112
ThinkServer RD230 Hardware Maintenance Manual
Option
Disabled[Enabled]
Disabled[Enabled]
[Enabled]Disabled
[All]12
Disabled[Enabled]
Disabled[Enabled]
Disabled[Enabled]
Disabled[ACPI C2]ACPI C3
Disabled[Enabled]
[Auto]C1C3C6C7
Disabled[Enabled]
Disabled[Enabled]
Disabled[Enabled]
Description
Enable or disable the Intel
Virtualization Tech. This technology
can provide additional capacity for
hardware computing. If you set this
feature to Enabled, you have to turn
off the server and disconnect the
power cord from electrical outlet, and
then reconnect the power cord and
turn on the server to make this feature
take effect.
Enabling the Execute-Disable Bit
Capability can prevent the executive
code of some malicious software
from using the data page.
Enable or disable the hyper-thread
technology. (Whether your server
supports this feature or not is
depending on the type of the installed
microprocessor.)
Enable or disable the multi-core
processing function.
Enable or disable the SpeedStep
technology.
Enable or disable the Turbo Mode
technology.
Enable or disable the C-STATE
technology.
Set the microprocessor C3 state
mode.
Enable or disable the C6 state of the
microprocessor.
Set the C state package limit.
Enable or disable the C1 State
Demotion of the microprocessor.
Enable or disable the C3 State
Demotion of the microprocessor.
Enable or disable the microprocessor
throttling in ACPI.