REVERSING AND REATTACHING
° Using a 1/4" socket wrench,
loosen and remove Hinge Pin from
Hinge Bracket. Remove washer underneath
hinge and set aside.
NOTE: At this point the door wiii be loose, lift up door slightly
and remove it.
See BASE GRILLE iNSTRUCTiONS.
° Remove the washer from the Bottom Hinge Pin.
° Using a 1/4" socket wrench, loosen and remove Hinge Pin from
the Bottom Hinge. Reattach
the Hinge Pin to the opposite
of the hinge.
NOTE: This is easier to do while the hinge is still attached.
° Loosen and remove the 2 bolts and use the phillips
screw to remove the Middle
Hinge Bracket from refrigerator
housing. Set parts aside.
socket wrench with 2-inch extension,
the 3 bolts and remove the Bottom hinge from right side of