Kenmore 7997 - 19.0 cu. Ft. Top Freezer Refrigerator Use And Care Manual page 20

CRISPER AND COVER CRISPER
To remove the crisper:
1. Puii crisper drawer out to drawer stop.
2. Lift the drawer up and toward you to pull out and remove.
3. To replace crisper, slide back fully past the drawer stop.
\
To remove the crisper gNass:
1. Remove crisper drawers.
2. To remove glass above crispers, reach in under the glass and
lift up.
3. Push glass up and out.
CRISPER HUMiDiTY CONTROL
You can control the amount of humidity in the moisture-sealed
crispers.
Adjust the control to any setting between _' and _ .
_'_'-_ __ lets air out of the crisper for best storage of fruits.
-_
keeps moist air in the crisper for best stroage of fresh, leafy
vegetables.
You can control the humidity in the crisper compartments, move
the slide above each crisper up (more moisture) or down (less
moisture).
SNAP-ON DOOR RACKS
The door racks may be removed for easier cleaning. Door
racks are in both, the refrigerator and the freezer. The door
racks are force-fitted with tabs and slots.
Snap-On Door Racks
To remove door racks:
1. Remove all items from the door rack.
2. Push sides of rack together while lifting up. Rack will lift out.
To remove the crisper cover:
1. Remove both crisper drawers.
2. While holding the center crisper cover support in place, pull
the cover up and out.
To replace the racks:
1. Hold door rack ends with both hands tilted slightly
downward and push together slighlty while fitting tabs on
rack into slots in door. Force-fit into place.
21