Control Panel - Panasonic PT-DW530U Operating Instructions Manual

About Your Projector

CONTROL PANEL

J
<POWER ON> button
Switch between stand-by mode and projection mode.
Switches to VIDEO or S-VIDEO input.
Switches to RGB1 input.
Switches to RGB2 input.
Switches to DVI-D input.
Switches to HDMI input.
Switches to NETWORK input.
<MENU> button
Displays and clears the main menu, and returns to the
previous menu when the menu is displayed.
Terminals on side
J
LAN
Connect a LAN cable for network connection.
DVI-D IN
Connect a single link DVI-D signals.
HDMI IN
Connect a HDMI signals.
VIDEO IN
Connect a VIDEO signals.
S-VIDEO IN
Connect an S-VIDEO signals.
RGB (YP P )1 IN
B R
Connect an RGB or YP
RGB2 IN
Connect an RGB or YP
Attention
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to
z
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only.
z
20
- ENGLISH
*
P signals.
B R
P signals.
B R
▲▼◄►button
Use these buttons to select menu items, change settings,
adjust levels, and to enter the [SECURITY] password.
<FUNCTION1> button
Assign the frequently use functions from options for
shortcut.
<ENTER> button
Press to activate a menu selection or to initiate a function.
<AV MUTE> button
Turn off the projection temporarily. (
<AUTO SETUP> button
Pressing this button while projecting an image automatically
corrects the picture positioning on the screen. While the
auto setup feature is active, a message "PROGRESS"
Æ
appears on the screen. ( page 37)
*
DVI-D IN (PT-DZ570U/PT-DW530U)
Connect a single link DVI-D signals.
SERIAL IN
Connect an RS-232C cable from/to a computer.
REMOTE IN
Connect a cable from an external control circuit.
VARIABLE AUDIO OUT
Connect an audio cable for outputting audio signals to the
connected equipment.
AUDIO IN 1-3
Connect audio cables for inputting audio signal
corresponding to VIDEO IN, S-VIDEO IN.
Æ page 36)