Brother HL-5470DW User Manual page 95

General Information
Network Menu (continued)
Submenu 1 Submenu 2
Wi-Fi Direct Status Info. Status
(Continued)
I/F Enable -
Network Reset Restores all network settings of the internal print server to the factory default.
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
2
For HL-6180DW(T)
Reset Menu
Display Shows
Network
Factory Reset
The factory settings are shown in Bold with an asterisk.
Menu Selections
Signal
Channel
Speed
Description
Restores all network settings of the internal print server to the factory default.
Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
Options
G/O Active(**) /
Client Active /
Not Connected / Off /
Wired LAN Active
** = the number of devices
-
-
-
On / Off*
Descriptions
You can see the current Wi-Fi
Direct™ network status.
You can see the current Wi-Fi
Direct™ network signal
strength.
When your machine acts as the
Group Owner, the LCD always
shows Strong.
Shows the channel in use when
the Status is
G/O Active(**) or
Client Active.
Shows the connecting speed
when the Status is
G/O Active(**) or
Client Active.
Enable or Disable the Wi-Fi
Direct™ connection.
3
3
89