Brother HL-5470DW User Manual page 56

Driver and Software
 Toner Save
You can conserve toner use with this feature. When you set Toner Save to On, print appears lighter.
The default setting is Off.
Note
• We do not recommend Toner Save for printing Photo or Gray Scale images.
• Toner Save is not available for HQ 1200 and 1200 dpi resolutions.
 Sleep Time [Min.]
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep
mode, the machine acts as though it were turned off. When you choose Printer Default, the timeout
setting will be reset to the specific time set at the factory; this can be altered in the driver. Intelligent
Sleep Mode automatically adjusts to the most suitable timeout setting depending on the frequency of
your machine use.
While the machine is in Sleep Mode, the LCD shows Sleep, but the machine can still receive data.
Receiving a print job will automatically wake up the machine to start printing.
 Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The default setting is On.
High Quality Image Printing

You can get high quality image printing. If you set High Quality Image Printing to On, the print speed
will be slower.
Improve Print Output

This feature allows you to improve a print quality problem.
• Reduce Paper Curl
If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you
do not need to choose this setting. We recommend that you change the printer driver setting in
Media Type to a thin setting.
Note
This operation will decrease the temperature of the machine's fusing process.
• Improve Toner Fixing
If you choose this setting, the toner fixing capabilities may be improved. If this selection does not
provide enough improvement, change the printer driver setting in Media Type to a thick setting.
Note
This operation will increase the temperature of the machine's fusing process.
2
50