Brother HL-5470DW User Manual page 90

General Information
Print Menu (continued)
Submenu Menu Selections
Epson FX-850 Top Margin
(Continued)
Bottom Margin
Lines
IBM Proprinter Font No.
Font Pitch
Font Point
Character Set
Table Print
Auto LF
Auto CR
Auto Mask
Left Margin
Right Margin
The factory settings are shown in Bold with an asterisk.
Options
#.##
#.##
###
I000 / ... / I059* / ... / I071 Sets the font number.
0.44 / ... / 10.00* / ... /
99.99
4.00 / ... / 12.00* / ... /
999.75
PC-8* / PC-8 D/N / ...
-
On / Off*
On / Off*
On / Off*
##
##
Descriptions
Sets the top margin at a distance
from the top edge of the paper: 0.00,
0.33, 0.50, 1.00, 1.50 or 2.00 inches.
The default setting is 0.33 inches.
Sets the bottom margin at a distance
from the bottom edge of the paper:
0.00, 0.33, 0.50, 1.00, 1.50 or
2.00 inches. The default setting is
0.33 inches.
Sets the number of lines on each
page from 5 to 128 lines. The default
setting is 62 lines (Letter).
Sets the font pitch.
Font Pitch menu will appear when
you choose I059 to I071 in
Font No. setting.
Sets the font size.
Font Point menu will appear when
you choose I000 to I058 in
Font No. setting.
Sets the symbol set or the character
set.
Prints code table.
If Change Emulation appears on
the LCD, choose Auto(EPSON),
Auto(IBM) or HP LaserJet in
Emulation of the Print Menu.
(See page 81.)
ON: CR i CR+LF, OFF: CR i CR
ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Sets the top and bottom margins to
two-line each. When you set
Auto Mask to On, this setting
overrides the Top Margin and
Bottom Margin settings.
Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
Sets the right margin at column 10 to
80 columns at 1 cpi. The default
setting is 80 cpi.
3
84