Cannot Print And There Is A Firewall On The Computer - Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic Wireless Setup Manual

V
ERIFY THAT THE PRINTER IS WORKING
•
Insert the Software and Documentation CD and set up the printer using a USB connection.
•
If the printer works over a USB connection, the printer is working properly.
M
AKE SURE THE PRINTER DRIVER IS INSTALLED ON THE PRINTER
All computers that print to the wireless printer must first have the printer driver installed.
•
Insert the Software and Documentation CD and install the printer driver.

Cannot print and there is a firewall on the computer

Third-party (non-Microsoft) firewalls can interfere with wireless printing. If the printer and computer are configured
correctly, and the wireless network is working, but the printer will not print wirelessly, a firewall could be the problem.
If there is a firewall (other than the Windows firewall) on the computer, try one or more of the following:
•
Update the firewall using the most recent update available from the manufacturer. Refer to the documentation
that came with your firewall for instructions on how to do this.
•
If programs request firewall access when you install the printer or try to print, make sure you allow those programs
to run.
•
Temporarily disable the firewall and install the wireless printer on the computer. Re-enable the firewall when you
have completed the wireless installation.
Network printer does not show up in the printer
selection list during installation
M
AKE SURE THE PRINTER IS ON THE SAME WIRELESS NETWORK AS THE COMPUTER
The SSID of the printer must match the SSID of the wireless network.
Find the network SSID
1
Type the IP address of your wireless access point into the address field of your browser.
a
If you do not know the IP address of the wireless access point, do one of the following:
In Windows Vista
1
Click .
2
Click All Programs
3
Click Command Prompt.
In Windows XP and earlier
1
Click Start.
2
Click All Programs or Programs
b
Type ipconfig.
Accessories.
Accessories
Troubleshooting wireless setup
30
Command Prompt.