Transmission To An E-Mail Address - Konica Minolta bizhub PRO 1051 User Manual

7
7.2

Transmission to an E-Mail Address

When you send the scanned data as an attached file of an E-Mail, necessary
procedures depend on whether the addresses are registered in advance or
they are input manually.
!
Detail
Refer to the following pages.
"When an E-Mail Address is Already Registered"................. p.7-4
"When an E-Mail Address is Input Manually"........................ p.7-8
When transmitting a message to the E-mail address, the setting of the
Administrator mail address is required. For details, refer to the "Adminis-
trator registration" in the User's Guide (POD Administrator's Reference).
When an E-Mail Address is Already Registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Make sure that the [E-Mail] key is selected.
– In the initial settings, the Select Destinations/Storage Locations
screen (E-Mail) is displayed. For information on the initial settings of
the [SCAN] tab, contact your administrator of the copier.
3
If you want to put a Title on an E-Mail, press the [Input Title] key.
– Not putting any Title will not cause any problem. An E-Mail without
a Title will be sent with the scanned data being attached.
7-4
Using the Network Scanner Features
bizhub PRO 1200/1051 Scanner