Hitachi 55PD8800 User Manual page 27

MENU OPERATION (continued)
Setup Menu (RGB mode) (continued)
Selected Items
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
Information
The items indicated by "
The signal mode is identifi ed by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost
same values in all the above items might be regarded as the same signal.
The item "Auto Adjust" cannot be stored. Press
0.7V
1.0V
Off
On
Off
On
Off
1280x768
1366x768
Off
On
PC
Movie
" can be automatically stored the setting depending on the signal mode.
*
OK
Setup hint
Normally, select [0.7V].
Select [1.0V] only when the whole display becomes too
white.
Select whether indicating the PC signal frequency infor-
mation on Input Signal Screen Display or not.
It allows you to switch display size to [Full] and [Real]. (See
"Size Switching" on for the details.)
39
This function is available only for WVGA signal.
Refer to "Recommended Signal List" on
This function is available only for WXGA signal.
Refer to "Recommended Signal List" on
Reduce the fl ickers on the screen when set to [On].
Select [Movie] when you see the moving image on PC.
to start auto adjustment as needed.
.
59
.
59
26