Input Switching To Tv/Av1~5, Hdmi, And Rgb; Input Signal Screen Display - Hitachi 55PD8800 User Manual

BASIC OPERATION (continued)

Input Switching to TV/AV1~5, HDMI, and RGB

By pressing Input Select button, you can switch the input.
To watch actual broadcast, press Input Select button on the control panel,
the numeric buttons or Channel Up/Down button on the remote control.
To display the image outputting from the external equipments
connected to each terminal (AV1~5, HDMI 1, 2, and RGB), select
corresponding mode.
1. Press Input Select buttons on the remote control.
2. The Input modes can be also switched by using Input Select button
on the control panel.
Each time this button is pressed, the screen displays corresponding
mode by following order.
TV
RGB
3. To directly go back to TV mode, pressing channel Up/Down buttons on
either remote control or the control panel.
Also, you can use the numeric buttons on the remote control.

Input Signal Screen Display

The input signal status can be displayed on the screen by
pressing the button of the remote control.
+
The display will go out in approximately 6 seconds.
TV
Off-timer
-- -- Min.
OFF
On-timer
-- -- : -- --
VIDEO
Off-timer
-- -- Min.
OFF
On-timer
-- -- : -- --
RGB
Off-timer
-- -- Min.
OFF
On-timer -- -- : -- --
AV1 AV2 AV3 AV4
HDMI 2 HDMI 1 AV5
1
ABCDE
AV1
Composite
RGB
H : 48.4kHz
V : 60.1 Hz
SD MEMORY
CARD
PUSH-EJECT
P
P
OK
PH35814
TV position
Name
Sound mode
Input mode
Signal mode
Input mode
Input horizontal frequency
Input vertical frequency
Input Select buttons
Channel
Up/Down button
Channel Up button
Channel Down button
Input Select
RECALL
button
20