Table of Contents
Advertisement
FUNCTION (continued)
Photo Input Function
With this Photo Input function, you can enjoy watching Photos from such devices as
Digital Still Camera and SD card on monitor along with useful features such as Slide
Show with Background Music and Movie picture.
Operating the Photo Input
1. Before operating this function, make sure to turn the power OFF /Standby.
2. Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as follows.
Digital Still Camera
USB Card Reader
SD Card / MMC
3. Connect the USB cable to the input terminal as shown (Right side), or insert the
SD card /MMC into the slot (Left side).
4. Turn ON the TV after the USB cable is connected or the SD card / MMC is inserted.
5. Press
button on the remote control to activate Photo Input mode.
(Then, turn ON the DSC. Refer to the user manual of your DSC for the timing.)
6. Each time
button is pressed, you can switch the mode as follows.
Photo
Left Side
SD Card/MMC
SD MEMORY
CARD
PUSH-EJECT
P
P
OK
PH35814
NOTE
Do not insert SD Card/MMC and USB cable at the same time.
Do not insert anything other than SD Card/MMC into the slot. It could cause malfuction or damage to the slot.
Do not allow children to play around the slot.
45
: Set up with reference to the content about
"connecting to PC" in the user manual of DSC.
: Insert only one memory card.
: Ensure the card is inserted in the correct direction as
indicated near the slot.
Movie
Normal Screen
Rear Panel (Left side and Right side)
Right Side
USB cable
Digital Camera
USB Card Reader
Advertisement
Table of Contents
