Turning Bluetooth On Or Off; Wi-Fi - HP hx2190b - iPAQ Pocket PC Manual

Turning Bluetooth On or Off

To turn on Bluetooth:
1. From the Today screen, tap the iPAQ Wireless icon located in the
Navigation bar at the bottom of the screen.
2. On the iPAQ Wireless screen, tap the Bluetooth icon.
When Bluetooth is turned on, the Bluetooth LED on the front of your
HP iPAQ flashes blue.
To turn off Bluetooth, tap the Bluetooth icon again. When Bluetooth is
turned off, the Bluetooth LED turns off and no incoming or outgoing
Bluetooth connections are possible.
TIP: Turn Bluetooth off when you are not using it.

Wi-Fi

With wireless access, you do not need to use cables to connect your
HP iPAQ to the Internet. Instead, access points transmit data to and from
your wireless device. Your HP iPAQ can connect to an 802.11b WLAN or
connect directly to other WLAN-enabled devices.
●
Access the Internet
●
Send and receive e-mail
●
Access corporate network information
●
Use virtual private networks (VPNs) for secure remote access
●
Use hotspots for wireless connectivity
From the Today screen, tap the iPAQ Wireless icon located in the
Navigation bar at the bottom of the screen to access the Wi-Fi features.
NOTE: The Wi-Fi antenna for the HP iPAQ is located in the top of the
device. If you cover up the top of the HP iPAQ after you have turned on
Wi-Fi, signal strength diminishes.
1
With Wi-Fi, you can:
1
31