Synchronizing With A Computer - HP hx2190b - iPAQ Pocket PC Manual

To perform a clean reset and return your HP iPAQ to factory settings:
1. Press and hold the Calendar, Power, and Messaging buttons.
2. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then
remove the stylus from the Reset button.
The HP iPAQ restarts and powers on.
CAUTION: If you perform a clean reset, your HP iPAQ loses all data,
including data in Persistent Store.

Synchronizing with a Computer

Synchronizing your HP iPAQ with your computer allows you to keep the
same information (such as calendar, contacts, and e-mails) on both units,
making it available when you work on your computer or when you take
your HP iPAQ on the go. There are several ways to synchronize your
HP iPAQ with your computer:
●
HP Desktop Cradle (not included with all models)
●
Autosync cable (not included with all models)
●
Bluetooth
●
Infrared
●
Wi-Fi and a server
To synchronize your HP iPAQ and your computer using the desktop cradle
or an autosync cable:
1. Be sure ActiveSync 4.5 or greater is installed on your computer.
2. Plug the AC Adapter into an electrical outlet and connect the other
end of the AC Adapter to the AC connector on the desktop cradle or
autosync cable.
3. Perform one of the following:
●
Slide the bottom of your HP iPAQ into the desktop cradle and
push firmly to seat it.
●
Connect the 22-pin connector on the autosync cable to the
universal sync connector on the bottom of your HP iPAQ.
13