D-Link DSN-6020 User Manual page 70

Select "/ Volume configuration / RAID group".
1.
Click "Create".
2.
Input a RG Name, choose a RAID level from the list, click "Select PD" to choose the
3.
RAID physical disks, then click "OK".
4. Check the setting. Click "OK" if all setups are correct.
5. Done. A RG has been created.
(Figure 4.4.6.2: Creating a RAID 5 with 3 physical disks, named "RG-R5".)
Step 2: Create VD (Virtual Disk).
To create a data user volume, please follow the procedures.
Figure 4.4.6.1
Figure 4.4.6.2
70