Entity Property; Node - D-Link DSN-6020 User Manual

(Figure 4.3.1.5 shows a user can ping host from the target to make sure the data port
connection is well.)
4.3.2

Entity property

"Entity property" can view the entity name of the system, and setup "iSNS IP" for
iSNS (Internet Storage Name Service). iSNS protocol allows automated discovery,
management and configuration of iSCSI devices on a TCP/IP network. Using iSNS, it needs
to install an iSNS server in SAN. Add an iSNS server IP address into iSNS server lists in
order that iSCSI initiator service can send queries. The entity name can be changed.
4.3.3

Node

"Node" can view the target name for iSCSI initiator. DSN-6410 & 6410w/640 supports
up to 32 multi-nodes. There are 32 default nodes created for each controller.
Figure 4.3.1.5
Figure 4.3.2.1
48