Ses; Hard Drive S.m.a.r.t - D-Link DSN-6020 User Manual

Battery
Level (%)
4.5.3

SES

SES represents SCSI Enclosure Services, one of the enclosure management standards.
"SES configuration" can enable or disable the management of SES.
(Figure 4.5.1.1: Enable SES in LUN 0, and can be accessed from every host)
The SES client software is available at the following web site:
SANtools: http://www.santools.com/
4.5.4

Hard drive S.M.A.R.T.

S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) is a diagnostic tool for
hard drives to deliver warning of drive failures in advance. S.M.A.R.T. provides users
chances to take actions before possible drive failure.
S.M.A.R.T. measures many attributes of the hard drive all the time and inspects the
properties of hard drives which are close to be out of tolerance. The advanced notice of
possible hard drive failure can allow users to back up hard drive or replace the hard drive.
This is much better than hard drive crash when it is writing data or rebuilding a failed hard
drive.
"S.M.A.R.T." can display S.M.A.R.T. information of hard drives. The number is the
current value; the number in parenthesis is the threshold value. The threshold values from
different hard drive vendors are different; please refer to hard drive vendors' specification
for details.
S.M.A.R.T. only supports SATA drives. SAS drives do not have this function now. It will
show N/A in the web page for SAS drives.
Current power percentage of battery level.
Figure 4.5.3.1
78