Zoom Setup; Collated Copy Setup; Analysis Origin Setup; Contrast Setup - Oki MB280 MFP User Manual

MB280
Parameter
QUALITY Optimal resolution for
TEXT documents containing text.
Optimal resolution for
PHOTO documents containing
photographies.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
You can also change the resolution by
Note
pressing the

Zoom setup

The ZOOM parameter allows you to reduce or enlarge an
area of a document by choosing the origin and the zoom
level to apply to the document, from 25 to 400 %.
! 842 - ADVANCED FCT/COPY/ZOOMING
1 Press !, enter 842 using the keypad.
2 Enter the desired
alphanumerical keypad
predefined values with the buttons " and !.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the

Collated copy setup

The COLLATED parameter allows you to assemble or
disassemble your copies.
! 843 - ADVANCED FCT/COPY/COLLATED
1 Press !, enter 843 using the keypad.
2 Select the desired option with the buttons " and !
according to the following table:
Parameter
The printer assembles the copies of
the original document.
E.g.: if you make three copies of a
COLLATED
10-page document, the document is
copied from page 1 to 10 three times
over.
The printer does not assemble the
copies of the original document.
E.g.: if you make three copies of a
UNCOLLATED
10-page document, page 1 is copied
three times, then page 2, then page
3, etc.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
Signification Icon
button.
button.
zoom level with
or choose among
button.
Signification
button.

Analysis origin setup

If you want, you can change the origin of the scanner.
By entering new values for X and Y in mm (X < 209 and
Y < 280), you move the analysed area as shown on the
diagram below.
! 844 - ADVANCED FCT/COPY/ORIGIN
1 Press !, enter 844 using the keypad.
2 Select the X and Y coordinates with the buttons "
or !.
3 Setup the desired coordinates with the numerical
keypad or the buttons " and !.
4 Confirm your choice by pressing the OK button.
5 Quit this menu by pressing the
the

Contrast setup

The CONTRAST parameter allows to choose the
photocopy contrast.
! 845 - ADVANCED FCT/COPY/CONTRAST
1 Press !, enter 845 using the keypad.
2 Setup the desired level of contrast with the buttons
" and !.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the

Brightness setup

The BRIGHTNESS parameter allows to lighten or darken
your output.
! 846 - ADVANCED FCT/COPY/BRIGHTNESS
1 Press !, enter 846 using the keypad.
2 Setup the desired brightness with the buttons "
and !.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the

Paper type setup

! 851 - ADVANCED FCT/SCAN. & PRINT/PAPER
1 Press !, enter 851 using the keypad.
2 Select the paper NORMAL or THICK that you use
with the buttons " and !.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
- 22 -
button.
button.
button.
TYPE
button.