Table of Contents
Advertisement
FAXING A DIVIDED ORIGINAL (DUAL PAGE SCAN)
When an open book is scanned and faxed, you can use this function to divide the two open pages of the book into two
separate fax pages.
This function can only be used when the original is scanned using the document glass.
Your machine
Book or sheet original
When page division is set,
Selecting Dual Page Scan
Follow the steps below and then send the fax.
1
Touch the SPECIAL MODES key in fax mode
and then touch DUAL PAGE SCAN.
SPECIAL MODES
STANDARD
POLLING
RESOLUTION
DUAL PAGE
EXPOSURE
SCAN
2
Touch the OK key.
AKER
REDIAL
OK
3-10
Transmission to
other machine
the original is divided
into two pages when
scanned into memory
You will return to the initial
screen.
The other machine
[Example]
Scanned original size
Transmitted document
11"x17"
3
Place the original on the document glass (page
1-7), and perform the transmission operation.
If you have more originals to scan after pressing the
Start key and scanning the first original, change originals
and repeat scanning until all originals have been
scanned. When finished, press the READ-END key that
appears in the message display. (Page 2-3)
NOTES
• When you set Dual Page Scan, the original size is fixed
at 11"x17". Automatic original size detection will not
function.
When the original on the document glass is scanned, it
will be divided at the book mark on the document glass
scale, with one page on the left side of the book mark
and one page on the right side.
• To cancel Dual Page Scan...
Press the CA key.
Printed out as
two separate pages
Two 81/2"x11" pages
Advertisement
Table of Contents
