Installing The Authentication Token Application; Installing Pki Applications - Lexmark 6500e Installation And Configuration Manual

Pki-enabled device installation and configuration guide
Hide thumbs Also See for 6500e:
Table of Contents

Advertisement

Printer model
X73x
X86x
Note: If your printer does not have the minimum firmware version or a later version installed, you will need to
install a firmware update before proceeding to other configuration tasks. Contact the Lexmark Solutions Help
Desk for help in obtaining the correct firmware.
Updating the firmware
If you have obtained a newer version of the firmware:
1
From the Embedded Web Server, click Settings > Update Firmware.
2
From the Update Firmware page, Browse to locate the new flash file, and then click Submit. It may take several
minutes for the update to complete.
Note: Do not power off the printer while the update is in progress.

Installing the authentication token application

The authentication token application enables the printer to communicate with the type of authentication token
being used (CAC/DOD or PKCS15-compatible card). You must install the correct application file for your card type:
Card type
CAC/DOD
PKCS15
The file names shown are not version-specific. Use the latest version available for each file. For information about available
versions, contact the Lexmark Solutions Help Desk.
1
From the Embedded Web Server, click Settings > Embedded Solutions.
2
On the Solutions tab, click Install.
3
Browse to locate the correct application file, and then click Start Install.
4
After the installation has finished, click Return. On the Solutions tab, you should now see an authentication token
listed under Installed Solutions.

Installing PKI applications

The PKI applications enable users to sign and encrypt E-mail messages sent from the printer, securely scan documents
and images to a network file share, and hold documents at the printer until released by an authorized user. The
authentication application is required, but all other applications are optional and can be installed as needed.
Minimum firmware version
LR.FL.P224cLDc
LR.SP.P108LDc
Authentication token solution file
authtokencaccard-x.x.x.fls
authtokenpkcs15-x.x.x.fls
Configuring PKI-enabled devices
7

Advertisement

Table of Contents
loading

Table of Contents