Volume Bass Treble Balance Fader - Dual XD5220 Installation & Owner's Manual

XD5220
General Operation
6
OPERATION
Reset
Press and hold for more than 2 seconds to RESET the unit
upon initial installation. The RESET button is located behind
the faceplate. Refer to page 2 for details.
Audio
Press AUD to select between Volume (default), Bass, Treble,
Balance & Fader.
VOLUME
Bass
Press AUD until BA appears
Press VOL t or s to adjust
( -7 minimum / 7 maximum)
Treble
Press AUD until TR appears
Press VOL t or s to adjust
( -7 minimum / 7 maximum)
Balance
Press AUD until B appears
Press VOL t (LEFT) or s (RIGHT) to adjust
(BL 15/BR 15) BAL 00 represents equal balance.
Fader
Press AUD until F appears
Press VOL t (FRONT) or s (REAR) to adjust
(FF 15/FR 15) F 00 represents equal balance.
BASS TREBLE BALANCE FADER