Dvd multimedia receiver with bluetooth featuring a 7" touch screen display (28 pages)
Summary of Contents for Dual XDVD9101
Page 1
All manuals and user guides at all-guides.com XDVD9101 INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with 7” Touch Screen Display Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction.
Page 2
All manuals and user guides at all-guides.com Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
All manuals and user guides at all-guides.com XDVD9101 PREPARATION Table of Contents Page Warning Statement ..........
Page 4
All manuals and user guides at all-guides.com XDVD9101 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or...
Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD9101 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
Page 6
All manuals and user guides at all-guides.com XDVD9101 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Page 7
All manuals and user guides at all-guides.com XDVD9101 INSTALLATION Wiring Diagram - Inputs/Outputs Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with the CAMERA input.
Page 8
All manuals and user guides at all-guides.com XDVD9101 INSTALLATION Wiring Diagram - Optional A/V Connections...
Page 9
All manuals and user guides at all-guides.com XDVD9101 OPERATION IR Remote Preparation To first use the IR Remote control, Notes: you must first pull the battery • Remove the battery if the remote will insulation tape out not be used for a month or longer •...
All manuals and user guides at all-guides.com XDVD9101 OPERATION Control Locations - Monitor Closed Display Channel/Chapter/Track Down/Fast Reverse Secondary LCD Disc-In Indicator Open/Close Monitor Infrared Sensor 3.5mm A/V Input Band/Disc Stop USB Input Mode Reset Mute/Loudness Channel/Chapter/Track Up/Fast Forward Power/Volume/EQ...
Page 11
All manuals and user guides at all-guides.com XDVD9101 OPERATION Control Functions - Monitor Closed Display When the monitor is closed, press DISP to toggle display between information available for the current mode such as clock, frequency, track or chapter information.
Page 12
Press the volume knob momentarily to select between Flat, Classic, Pop, Rock or User EQ presets. Caution • Due to its highly technological design, the XDVD9101 faceplate is NOT removable. Do not attempt to remove the faceplate. • Upon installation, do not attempt to move the monitor by hand. Use the buttons, the OPEN button on the front panel or the remote control.
Page 13
All manuals and user guides at all-guides.com XDVD9101 OPERATION Control Locations and Functions - Monitor Open Close Monitor Screen Angle Up Info/Picture Screen Angle Down Close Monitor Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.
All manuals and user guides at all-guides.com XDVD9101 OPERATION Control Locations - Remote Power Key #9 Root Mute/Loudness Escape Repeat Open/Close Search Chapter/Track/Seek Tune Down Key #0/DVD Setup Chapter/Track/Seek Tune Up Mode Volume Up Audio Select Fast Reverse/Manual Tune Down...
Page 15
All manuals and user guides at all-guides.com XDVD9101 OPERATION Control Functions - Remote Power Press once to turn the unit on, press again to turn unit off. Mute Press once to MUTE audio; press again to return audio. Press and hold to activate Loudness On/Off.
All manuals and user guides at all-guides.com XDVD9101 OPERATION General Operation Power On/Off Momentarily press PWR or any other button (except EJECT) to turn the unit on. Hold for 3 seconds to turn the unit off. Mute Press MUTE to silence the audio;...
Page 17
All manuals and user guides at all-guides.com XDVD9101 OPERATION General Operation Info Press INFO momentarily to display DVD disc information. Monitor Brightness Press and hold INFO for 3 seconds to change monitor BRIGHTNESS. Turn the rotary Q or P to adjust to desired level.
Page 18
All manuals and user guides at all-guides.com XDVD9101 OPERATION General Operation - Main Menu Main Menu Access There are two methods to access the MAIN menu: • Press MENU button on the remote control. • Touch MENU or the upper left corner of the touch screen from any mode.
All manuals and user guides at all-guides.com XDVD9101 OPERATION Main Setup - Menu Main Setup Menu • Press MAIN SETUP icon to access the Main setup mode. Page 1 • Select desired parameter you wish to change. • Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner.
All manuals and user guides at all-guides.com XDVD9101 OPERATION Main Setup - Menu Main Setup Menu • Press MAIN SETUP icon to access the Main setup mode. Page 2 • Press the PAGE DOWN icon to access Main Setup page 2.
Page 21
All manuals and user guides at all-guides.com XDVD9101 OPERATION Main Setup - Adjusting Radio Frequency Adjusting Radio Frequency Step 1 Touch MENU at the top left corner of screen. Step 2 Touch MAIN SETUP icon. Step 3 Touch USA. Step 4 Touch the setting for your region.
Page 22
All manuals and user guides at all-guides.com XDVD9101 OPERATION Main Setup - Adjusting the Clock 12Hr Clock Mode Step 1 Touch MENU at the top left corner of screen. Step 2 Touch MAIN SETUP icon. Step 3 3) Touch 00:00 area in the CLOCK row.
Page 23
All manuals and user guides at all-guides.com XDVD9101 OPERATION Main Setup - Setting the Anti-theft code The default Anti-theft password is 0000 and is turned off by default. To turn this feature on, follow the steps below. CAUTION!! This will lock your unit from operating if battery power is disconnected.
All manuals and user guides at all-guides.com XDVD9101 OPERATION Screen Setup - Menu Screen Setup Menu • From the main menu, press SCREEN SETUP icon to access the SCREEN setup mode. • Select desired parameter you wish to change. •...
Page 25
All manuals and user guides at all-guides.com XDVD9101 OPERATION Screen Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button on the front TFT...
Page 26
All manuals and user guides at all-guides.com XDVD9101 OPERATION Screen Setup - Setting TFT Angle Set for best viewing angle for your vehicle Step 1 1) Touch MENU at the top left corner of screen. Step 2 2) Touch SCREEN SETUP icon.
Page 27
All manuals and user guides at all-guides.com XDVD9101 OPERATION Screen Setup - Touch Screen Calibration Upon initial installation or occasionally, the touch screen may have to be calibrated. Follow these steps as described. Step 1 1) Touch MENU at the top left corner of screen.
Page 28
All manuals and user guides at all-guides.com XDVD9101 OPERATION AM/FM Tuner Operation - OSD Overview Tuner Mode From the main menu, touch TUNER icon on the screen to select AM/FM Tuner mode. Current Source Indicator Displays source currently playing. Main Menu Touch MENU to access the main menu.
Page 29
All manuals and user guides at all-guides.com XDVD9101 OPERATION AM/FM Tuner Operation - OSD Overview Tune Frequency - Up Touching this icon will tune the radio to a higher frequency by one frequency step. Touch and hold for continuous tuning up. (This function can also be performed by pressing the corresponding key on the remote control.)
All manuals and user guides at all-guides.com XDVD9101 OPERATION AM/FM Tuner Operation AM/FM Tuner Mode From the main menu, touch TUNER icon to select AM/FM Tuner mode. From the remote control or the front panel: Press MODE until the current station information is displayed on the screen.
Page 31
All manuals and user guides at all-guides.com XDVD9101 OPERATION AM/FM Tuner Operation Direct Preset Tuning To select a desired station from the preset station list, touch any of the displayed station frequencies or preset numbers from the list. Use the up and down arrows on screen to select between the preset pages, if necessary.
Page 32
All manuals and user guides at all-guides.com XDVD9101 OPERATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or...
Front Monitor Video Follow these two initialization procedures carefully to allow video playback on Initialization on the XDVD9101 front monitor: There are two situations to initiate the PARKING BRAKE sequence. Parking Brake Initialization First situation (if vehicle is moving): Situation 1 1) Stop vehicle, put in Park, make sure PARKING BRAKE is off/released.
Page 34
Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD9101 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas.
Page 35
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Setup - Inserting a Disc Disc Loading Slot Eject Button Insert DVD with label facing upwards Inserting a Disc With the label facing up, insert a standard size disc into the slot. The disc will automatically begin playback.
Page 36
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Setup - Touch Screen Controls Hidden Touch Screen areas There are several hidden TOUCH SCREEN areas as outlined below: while in DVD mode "A" area can be used in DVD, AUX 1 and AUX 2 modes to access MAIN menu.
Page 37
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Setup Menu - Language LANGUAGE Setup Menu With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu.
Page 38
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Setup Menu - Video Settings Video Setup Menu With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on Note: the remote to access the DVD setup menu.
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Setup Menu - Rating Rating Setup Menu With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu.
Page 40
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Operation - Touch Screen Controls Using the hidden Touch Screen Controls Touch AREA E DVD Mode From the main menu, touch the DISC icon on the screen to select DVD mode.
Page 41
Note: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD9101 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc.
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Operation Playback Control Touch Area E to bring up the on-screen buttons. Touch to fast forward or to fast reverse. Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x to 32x and back to 1x.
Page 43
All manuals and user guides at all-guides.com XDVD9101 OPERATION DVD Operation DVD Audio Touch AUD to change the audio stream. Each touch will cycle the language. From the remote control: Press the AUDIO button to select the Audio stream. Notes: •...
Page 44
All manuals and user guides at all-guides.com XDVD9101 OPERATION CD Operation - OSD Overview CD Mode From the main menu, touch the DISC icon on the screen to select CD mode. Current Source Indicator Displays source currently playing. Track Number Indicator Displays current track number and total number of tracks on the disc.
Page 45
All manuals and user guides at all-guides.com XDVD9101 OPERATION CD Operation - OSD Overview Page Down Touch the icon to see the next 6 tracks on the disc. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
All manuals and user guides at all-guides.com XDVD9101 OPERATION CD Operation Navigating the Track Title List Navigate the track title list in one of two ways: • Using the Page Up and Page Down buttons on the screen. • Using the arrow buttons on the remote control.
Page 47
All manuals and user guides at all-guides.com XDVD9101 OPERATION CD Operation Repeat Mode Touch RPT to repeat a track. Rpt Trk will appear next to the MENU button while this feature is activated. Touch RPT again to exit Random Mode.
Page 48
All manuals and user guides at all-guides.com XDVD9101 OPERATION MP3/WMA/JPG Operation - OSD Overview From the main menu, touch the DISC icon on the screen to select MP3/WMA mode. MP3/WMA Mode Current Source Indicator Displays source currently playing. File Number Indicator Displays current file number and total number of files in the current folder.
Page 49
All manuals and user guides at all-guides.com XDVD9101 OPERATION MP3/WMA/JPG Operation - OSD Overview Page Down Touch the icon to see the next 6 files in the current folder. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
All manuals and user guides at all-guides.com XDVD9101 OPERATION MP3/WMA/JPG Operation Sound to Image Indicator The Sound to Image indicator allows the selection of either sound (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist. Indicates that sound files are currently displayed. Press to switch to viewing image files.
Page 51
All manuals and user guides at all-guides.com XDVD9101 OPERATION MP3/WMA/JPG Operation Fast Forward/Fast Reverse From the remote control: Press to fast forward. Press to fast reverse. Intro Mode Touch INT on the screen to listen to all tracks in the current folder for 10 seconds at a time, starting from the next track.
Page 52
All manuals and user guides at all-guides.com XDVD9101 OPERATION USB Operation - OSD Overview USB Mode From the main menu, touch the USB icon on the screen to select USB mode. Current Source Indicator Displays source currently playing. File Number Indicator Displays current file number and total number of files in the current folder.
Page 53
All manuals and user guides at all-guides.com XDVD9101 OPERATION USB Operation - OSD Overview Page Down Touch the icon to see the next 6 files in the current folder. Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
OPERATION USB Operation USB Connection Connect a device using the USB port on the front of the XDVD9101. Sound to Image Indicator The Sound to Image indicator allows the selection of either sound (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist.
Page 55
All manuals and user guides at all-guides.com XDVD9101 OPERATION USB Operation Fast Forward/Fast Reverse From the remote control: Press to fast forward. Press to fast reverse. Intro Mode Touch INT on the screen to listen to all tracks in the current folder for 10 seconds at a time, starting from the next track.
Page 56
All manuals and user guides at all-guides.com XDVD9101 OPERATION Media Compatibility - Disc MEDIA File Type File System ISO9660 Level 1, Level 2 Level 3 ISO9660 JOLIET Playback Extension Filename 32 bytes 32 bytes Other ROMEO...
Page 57
All manuals and user guides at all-guides.com XDVD9101 OPERATION Media Compatibility - USB Flash Drive MEDIA USB Flash Drive File Type File System FAT 12 FAT 16/FAT 32 File .mp3/.MP3/.Mp3/.mP3 Extension .wma/.WMA .rmp/.m4a MPEG MPEG 1 ...
Page 58
All manuals and user guides at all-guides.com XDVD9101 OPERATION Media Compatibility - Notes Media Compatibility The following types of discs are compatible: • CD-DA, CD-ROM (ISO), CD-R, CD-RW • DVD Video, DVD+R/RW, DVD-R/RW The following types of discs/files are not compatible: •...
Page 59
All manuals and user guides at all-guides.com XDVD9101 OPERATION Operation of iPod - OSD Overview Operation of iPod Connect an iPod device using the included cable. From the main menu, touch the icon of the iPod device on the screen.
Page 60
All manuals and user guides at all-guides.com XDVD9101 OPERATION Operation of iPod - OSD Overview Fast Forward Touch the icon to fast forward at 2x speed. Touch again to cancel. Fast Reverse Touch the icon to fast reverse at 2x speed. Touch again to cancel.
All manuals and user guides at all-guides.com XDVD9101 OPERATION Operation of iPod Search Menu The content is organized by groups. Touch the on the screen to access the search menu. Once in search menu, select one of the group types from the menu, then select an item in that group.
Page 62
All manuals and user guides at all-guides.com XDVD9101 OPERATION Operation of iPod Song Control You can use the Fast Forward and Fast Reverse on-screen buttons to play a song forwards or backwards at a higher speed. Touch the same button a second time or press Play to return to normal playback.
Page 63
All manuals and user guides at all-guides.com XDVD9101 OPERATION Operation of iPod Playing Photos or Videos Notes: VIDEO/PHOTO FILES are only compatible with an iPod with video. It is not possible to view videos or photos on the in-dash monitor while the vehicle is moving.
Page 64
All manuals and user guides at all-guides.com XDVD9101 OPERATION Operation of iPod Selecting Music By: Playlists Artists Albums Genres Songs Composers Touch desired Folder, music will begin to play after selection. Character Support Only alphanumeric characters can be displayed (ASCII type).
All manuals and user guides at all-guides.com XDVD9101 OPERATION Auxiliary Inputs - AV1 /AV2 Using A/V1 Input Connect an optional audio/video source into the 3.5mm (front panel) input. Select AV/1 from the Main Menu to listen to audio. Engage parking brake as described on page 32 to watch video.
4. For more information and for the location of the original retail purchaser for products purchased from nearest authorized service center please contact an authorized Dual dealer and used in the U.S.A. us by one of the following methods: What is covered? This warranty covers all defects •...
All manuals and user guides at all-guides.com XDVD9101 OPERATION Specifications DVD Player Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz:...
All manuals and user guides at all-guides.com XDVD9101 OPERATION Troubleshooting General Problem Cause Action Yellow wire not connected or incorrect Check connections for proper voltage (11~16VDC) voltage Red wire not connected or incorrect Unit will not turn on voltage (no power)
Page 69
All manuals and user guides at all-guides.com XDVD9101 OPERATION Notes...
Page 70
All manuals and user guides at all-guides.com XDVD9101 OPERATION Notes...
Page 71
All manuals and user guides at all-guides.com XDVD9101 OPERATION Notes...
Need help?
Do you have a question about the XDVD9101 and is the answer not in the manual?
Questions and answers