Setup Wizard
If you do not use the NETGEAR Genie CD, you have to log in to the modem to set the
country, language, and Internet connection.
Note:
If you performed the NETGEAR Genie CD setup, the country,
language, Internet, and wireless network settings are already
configured.
To run the Setup Wizard:
1.
Follow the instructions in the installation guide that came in the package to cable and
power up the modem.
2.
Select Setup Wizard from the top of the modem menus to display the following screen:
3.
Select your country and language:
•
Country. It is important to specify the location where the broadband ADSL2+ modem
operates so that the Internet connection works correctly. In some locations, it is not
possible to change this setting.
•
Language. This defaults to English. You can select another language if you prefer.
4.
Select either Yes or No, I want to configure the Modem myself. If you select No, proceed
to
Manual Setup (Basic Settings)
5.
If you selected Yes, click Next.
With automatic Internet detection, the Setup Wizard searches your Internet connection
for servers and protocols to determine your ISP configuration.
Broadband ADSL2+ Modem DM111PSPv2
on page 21.
Modem Internet Setup
20