Log In To The Modem - NETGEAR DM111PSPv2 User Manual

• WAN port settings. This is your port address type (PPPoE by default) and ISP login name
and password. See
address types.
Login and System Information
• Modem login. The modem administrator login name and password as described in
to the Modem on page 17.
• System information. PC operating system, modem serial number, and WAN Port MAC
Address.

Log In to the Modem

Log in to the modem to view or change settings or to set up the modem.

To log in:
1. Type http://192.168.0.1 in the address field of your browser and press Enter to display
the login window. You can also enter either of these addresses to access the broadband
ADSL2+ modem: http://www.routerlogin.net or http://www.routerlogin.com.
2. When prompted, enter admin for the modem user name and password for the modem
password, both in lowercase letters.
Note: The modem user name and password are probably different from
the user name and password for logging in to your Internet
connection. See
If you do not see the login prompt:
1. Check the LEDs on the modem front panel to make sure that the modem modem is
plugged into an electrical outlet, its power is on, and the Ethernet cable between your
computer and the modem is connected to an Ethernet port.
Broadband ADSL2+ Modem DM111PSPv2
Manual Setup (Basic Settings)
Types of Logins
Modem Internet Setup
17
on page 21 for more information about
admin
********
on page 26 for more information.
Log In