NETGEAR DM111P - ADSL2+ Ethernet Modem Setup Manual page 14

Improperly connecting a filter to your modem router will block your ADSL
connection.
Connect the Ethernet cable from the modem router LAN port (D) to the Ethernet adapter
b.
in your computer.
Figure 9
c. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software. Cancel it if it starts automatically.
Connect the power adapter to the modem router and plug it in to a power outlet. Verify the
d.
following (see
1. The power light is lit after turning on the modem router.
2. The Ethernet light is on.
3. The ADSL light is green, indicating you are connected to the ADSL network.
10
Figure 10 on page 11):
D
Connecting the Router to the Internet