Status Lights; Cycles - Kenmore 2803 - Elite Oasis Agitator 4.5 cu. Ft. Capacity Washer Use And Care Manual

Use and care guide
Table of Contents

Advertisement

Available languages

Available languages

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add other garments
to the wash load.
STATUS
AddAGarment 0
Soak (
Wash,
Rinse,
Spin,
Clothes Cleanl
UdLock@
Clothes
Clean
The Clothes Clean light stays on until the lid is opened or the
Stop or Power button is pressed.
Lid Lock
When the Lid Lock status light glows, the washer lid is locked.
NOTE:
You must wait until the Lid Lock light turns off before the lid
can be opened.
Indicator
lights
An indicator light shows which Cycle, Modifiers and Options you
have selected.
Estimated
Time Remaining
Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
NOTES:
The time is an estimation only and may vary depending
on
load size, cycle, modifiers and options selected.
You may notice the time adjusting during the cycle. This is
normal.
The cycle time may be extended if oversudsing
occurs or the
load is unbalanced.
Turn the knob to choose the right wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow. If the default settings for the
Modifiers and Options are suitable for your wash load, you may
press Start to begin the wash cycle.
Casual/
Wrinkle Free
t
Normal,__
Heavy.,.l
_ _.
Whitest S _
Whites
Darks /
Colors
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see following chart).
NOTE: The times listed in the Preset Cycle Settings chart are
estimates. Preset cycle times may vary slightly depending on
your model.
3. Press START. The wash cycle will begin.
Preset Cycle Settings
Cycle
Preset
Soil Level*
Wash/Rinse
Minutes
Temp
Whitest Whites
74
Heavy
Hot/Cold
(No ATC)
Heavy Duty
77
Heavy
Hot/Cold
(No ATC)
Normal
47
Normal
Warm/Cold
Casual/Wrinkle
Free
46
Medium
Warm/Cold
Darks/Oolors
43
Normal
Cool/Cold
Delicate
35
Medium
Warm/Cold
Ultra Nandwash
35
Light
Cool/Cold
Drain & Spin
15
Not
Not
applicable
applicable
*Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
NOTE: Load only to the top of the stainless steel basket.
Overloading can cause poor cleaning. See "Starting Your
Washer."
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents