Status Lights; Cycles - Kenmore 110.2706 Use & Care Manual

Hide thumbs Also See for 110.2706:
Table of Contents

Advertisement

Available languages

Available languages

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add other garments
to the wash load.
STATUS
AdoA Oa_mrmt
Soak / Pmwash
Was["
Srsn
CJothes Clean
Lid L0ek
Clothes
Clean
The Clothes Clean light stays on until the lid is opened or the
Stop or Power button is pressed.
Lid Lock
When the Lid Lock status light glows, the washer lid is locked.
NOTE: You must wait until the Lid Lock light turns off before the
lid can be opened.
Indicator lights
An indicator light shows which Cycle, Modifiers and Options you
have selected.
Estimated
Time Remaining
Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
NOTES:
The time is an estimation only and may vary depending
on
load size, cycle, modifiers and options selected.
You may notice the time adjusting during the cycle. This is
normal.
The cycle time may be extended if oversudsing
occurs or the
load is unbalanced.
Turn the knob to choose the right wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow. If the default settings for the
Modifiers and Options are suitable for your wash load, you may
press Start to begin the wash cycle.
Casual/
Express
Wrinkle
Free
Wash
Normal
Bulky
/
- Bedding
Heav
Duty
ToweUs
Whitest
Darks /
=
Whites
DeUieate /
Colors
Handwash
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see following chart).
NOTE: The times listed in the Preset Cycle Settings chart are
an estimate. Preset cycle times may vary slightly depending
on your model.
3. Press START. The wash cycle will begin.
Preset Cycle Settings
Cycle
Preset
Soil
Wash/Rinse
_
Minutes
Level*
Temp
_
Whitest Whites
79
Heavy
Hot/Cold
(No ATC)
Heavy Duty
74
Heavy
Hot/Cold
(No ATC)
Normal
43
Normal
Warm/Cold
Casual/Wrinkle
Free
44
Medium
Warm/Cold
Light
Express Wash
34
Light
Warm/Warm
Bulky/Bedding
46
Normal
Warm/Cold
Sheets/Towels
46
Normal
Warm/Cold
Darks/Colors
42
Normal
Cool/Cold
Delicate/Nandwash
35
Light
Cool/Cold
Rinse & Spin
20
Not
Cold/Cold
applicable
Drain & Spin
10
Not
Not
applicable
applicable
Clean Washer
60
Not
Not
applicable
applicable
*Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents