Table of Contents
Advertisement
Figure 20: Changing the log level
Currently you can set values from 0 (minimal debug) to 3 (all available debug). If you experience
problems and want to troubleshoot LNI, set this value to 3, click the Save and Close button and
restart the Lotus Domino Server.
Note: Increasing the log level may affect the performance of the Domino server.
TMS Admin view is not available
After a clean LNI installation or upgrade, the TMS Admin view might not be available under the
administrative role. This is due to a missing installation step. Please verify the following steps:
1.
Open Domino Administrator using a server administration ID.
2.
Open the Resource Reservation Database Video Conference Resources.
3.
Open Access Control for the database, and select File > Application > Access Control.
4.
Verify that the Admin and Create Resource check boxes are selected for the current
(Administrative) user ID or for the other user you are using for the LNI integration.
5.
If the Admin role is not available, click on the Roles tab and manually add a role called Admin
(see Figure 21: Adding an Admin role ). Then return to step 4.
TANDBERG IBM Lotus Notes/Domino v 11.3 - Installation & getting started guide
APPENDIX C - Troubleshooting
Page 43 of 49
Advertisement
Table of Contents
