Table of Contents
Advertisement
Figure 11: Configuring the run-time of the Scheduled Synchronizer agent
Click the Schedule... button to open the Agent Schedule window. Set the interval to 0 hours and
7.
15 minutes, and verify that the Run on drop-down list is pointing to the correct server. Click OK.
8.
Save and close the Scheduled Synchronizer Agent.
9.
Close the database and Domino Designer.
Enabling agents in Resource Database (Notes/Domino V8.5)
1.
Start Lotus Domino Designer and open the Resource Reservations Database that you created
earlier (normally called ―Video Conference Resources‖) by going to File > Application > Open...,
selecting the server where the database was created, and then selecting the database from the
list.
2.
From the Applications pane, expand the Code item list to the left.
3.
Double-click on Agents.
4.
The main frame lists all the agents in the database (see Figure 12: Listing the Agents of the
database). Approximately 8 (depending on the Domino version) of the agents have yellow icons
next to them, marking them as disabled.
TANDBERG IBM Lotus Notes/Domino v 11.3 - Installation & getting started guide
Installation
Page 21 of 49
Advertisement
Table of Contents
