Table of Contents
Advertisement
8.
Save and close the Scheduled Synchronizer Agent.
9.
Close the database and Domino Designer.
Configuring the TMS settings of the Resource Database
1.
Open Domino Administrator using a server administrator ID.
2.
Open the resource reservation database that you created in the previous steps by going to File >
Application > Open and select the server on which the database was created. Then select the
database as you named it in the notes.ini file (default name: ―Video Conference Resources‖), and
click Open.
3.
Go to File > Application > Access Control to open the Access Control List window.
4.
Select the current user ID from the list, and select the Admin and Create Resource check boxes
to add the current user ID to these roles for the database (see Figure 15: Checking the Admin
and Create Resource check boxes).
Optionally, you can add additional users to these roles to enable those users to be able to modify
the configuration document and add additional resources. Adding additional user roles can also
be done post-installation.
In some installations, one or both of the check boxes might be missing. See the APPENDIX C -
Troubleshooting chapter of this document for more information.
Figure 15: Checking the Admin and Create Resource check boxes
5.
Close the database and re-open it. You now see a TMS Admin choice on the left side of the
database.
6.
Open the TMS Admin document to configure the integration settings.
TANDBERG IBM Lotus Notes/Domino v 11.3 - Installation & getting started guide
Installation
Page 24 of 49
Advertisement
Table of Contents
