Tiller Adjustment - Drive Medical Odyssey Mobility Scooter Owner's Manual

OPERATION
BRAKING
Electro-magnetic brake: Release the speed control lever completely, and the
electromagnetic brake will be activated automatically, and the scooter will stop.
WARNING
When on a gradient NEVER switch the vehicle to the freewheel mode. The electromagnetic
brakes will not be applied. This may result in injury.
SEAT
• The seat can be turned to 45 degrees or 90 degrees.
• Push the seat adjustment lever forward and swivel seat.
• Release the lever, then continue swiveling the seat until it locks in position.
ATTENTION
Return the seat to the forward position before driving.
HOW TO ADJUST THE ARMREST WIDTH
Loosen the knobs that secureat the back of the seat frame first, then adjust the armrest
width by sliding the armrest. Once satisfied with the width, tighten the knob.
HOW TO RE-POSITION THE SEAT
The distance between seat and tiller can be adjusted by repositioning the seat forward or
backward. Loosen the four bolts that secure the seat to the seat platform, reposition the
seat, then securely retighten the knobs.
HOW TO SET TO FREEWHEEL MODE
• Engaged mode : Lift the lever up completely, the scooter can
be driven by motor power.
• Freewheel Mode: Push the lever down completely, the
scooter can be moved manually.

TILLER ADJUSTMENT

The Tiller can be adjusted in three positions by following
steps.
1. Loosen the knob until adjustment spring can be used. You
should now have one to two centimeters of retractable play.
2. Place spring mechanism into your desired position. Ensure
the pin locates with a click into place.
3. Once satisfied, ensure hand wheel is fully tightened to
maximize safety.
13