Enabling Installed Options in the Drivers
Certain options such as additional memory, the duplexer, or
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and
enable the options. You only need to do this once.
For Additional Memory
If you have additional memory in your printer, use these instructions
to update the Windows PostScript driver so that it recognizes the
additional memory:
1. Click
Start
2. Highlight the printer name and click
3. Click the
4. Under
Installable
set the memory in the drop-down list to be the same as that now
installed in the printer, as shown in the MenuMap (to generate a
MenuMap printout, see "Printing the MenuMap" on page 34.
5. Click
OK
Sharp AR-C200P: Windows 2000 Printer Drivers • 140
→
Settings
Device Settings
Options, click
and close the Printers dialog box.
→ Printers.
File
tab.
Memory
then Properties.
Configuration, then