Setting Color Tuning From The Front Panel - Sharp AR-C200P - Color Laser Printer User Manual

Setting Color Tuning from the Front Panel

• In most cases, using Color Tuning is not necessary as the
printer is optimized for color printing at its default settings.
• Once you change these settings, they remain in effect until
you go back in and change them.
• To return the settings to the defaults, use the steps below to
set each value back to 0 (zero).
You can use the printer's menu to adjust the color intensity for a
specific color by adjusting the HIGHLIGHT, MID-TONE and DARK
(shadows) Color Tuning Patterns.
• To increase the color intensity, use a higher positive setting
(default = 0, maximum = +3).
• To decrease the color intensity, use a higher negative setting
(default = 0, maximum = -3).
For example, to adjust the intensity of the magenta portion:
Important!
Sharp AR-C200P: Setting up • 70